You must use the serial port on the computer to connect to the router's console. Most desktop PCs have a nine-pin serial port, but laptops don't always have this port. Plug the RJ-45 rollover cable connector into a DB-9 (female) Terminal adapter and then plug the adapter into the computer's serial port.
Make sure that you have correct console connection to Cisco Router or Switch. Connect the RJ45 jack of your console cable to the console port of your Cisco Router or Switch. Connect the other end to the Serial port of your computer.
Connecting the Console. Connect an HDMI cable to both the console and the monitor. If you're using HDMI, you'll have the easiest time connecting your console. Plug the HDMI cable into your console and the other end into your monitor.
Steps as follows: Plug the serial DB-9 end of the console cable into the serial DB-9 port on your laptop. If your laptop has no serial DB-9 port, plug the serial DB-9 end of the console cable into the serial DB-9 end of a USB to serial DB-9 adapter and then into a USB port on your laptop.
Access router command line interface using Windows laptop
- Under Category, choose Session.
- Under Connection type, choose Serial.
- In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.
- Click Open.
To access the AP console command prompt, press Enter when the AP displays the message “Hit <Enter> to stop autoboot.” If the autoboot countdown expires before you can interrupt it, turn the device off and then back on. Once the AP boot prompt appears, enter the AP console password.
You can stack any members of the 2930F family using VSF, so long as they're all running the same software version and using the same speed ports for the inter-switch VSF links (either all 10G or all 1G). As mentioned by Justin, you can stack up to 8 switches as of the latest switch software release, 16.06.
Aruba switches bring performance and reliability to the mobile-first campus. These industry-leading switches are scalable, secure, and feature HPE Smart Rate multi-gigabit ports for high-speed connectivity.
Use the [Tab] key to select the Manager Password field and enter a manager password of up to 16 printable ASCII characters. [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the manual option. [Tab] to the IP Address field and enter the IP address that is compatible with users network.
How to: Configure a HP ProCurve switch
- Step 1: Connect your serial connection.
- Step 2: Conenct PuTTY.
- Step 3: Get the IP address.
- Step 4: Set time server.
- Step 5: Set SNMP community info.
- Step 6: Launch the web GUI.
- Step 7: Configure basic info.
- Step 8: Create VLANs.
Press the small, recessed Reset button on the face of the switch. Issue the command, reload from within the CLI. Or, issue the command, boot system flash <pri | sec> to reboot into either primary or secondary flash. Or, unplug the switch for at least 10 seconds in order to cold boot the device.
Resetting Admin Password
- Connect a local console to the serial port on the managed device.
- From the console, login into the managed device as a password recovery user.
- Enter configuration mode by typing in configure terminal.
- To reset the administrator user account password, use the mgmt-user admin root command.
Open a browser software, enter the IP address of your Switch and access the HP Switch web interface. On the prompt screen, enter the administrative login information. After a successful login, the administrative menu will be displayed.
PuTTY can replace HyperTerminal for serial communications. It provides logging, a large scroll back buffer, and many other features. You are probably already using PuTTY for SSH and Telnet, but you can also use it for Serial TTY console connections.
How to assign a COM port to a USB device Windows 10?
- Open the Windows Device Manager.
- Click on the Ports (COM & LPT) to expand the selection.
- Right-click on the device whose designation you want to change and select Properties.
- Click on Port Settings and then click the Advanced button.
Open Putty and enter your Hostname or IP Address in the Hostname or IP Address field. The default port will be 22. Click on the Open button to open the command line window. In the command line window type in the SSH username at the login as prompt and press enter on your keyboard.
How to Connect Cisco Device via USB Cable Using Putty
- Login to Cisco's support site and download the Cisco USB Console driver.
- Plug in USB cable to Cisco device and PC.
- From your PC open Device Manage à Ports should now show the Cisco Serial (COM3) listed.
- Open Putty, choose Serial and change COM1 to COM3 and click Open.
SOLUTION
- Go to Windows Device manager > Multi-port serial adapters.
- Select the adapter and right click to open the menu.
- Click on the Properties link.
- Open the Ports Configuration tab.
- Click on the Port Setting button.
- Select the Port Number and click OK.
- Click OK to apply the changes.
Replies (5) ?
- Open Device Manager.
- Click on View in the menu bar and select Show hidden devices.
- Locate Ports (COM & LPT) in the list.
- Check for the com ports by expanding the same.
Connecting Your EquipmentConnect an Ethernet cable to the 3Com Switch in any available port. Connect the other end of the Ethernet cable directly to your computer or router. **NOTE: Only one internet device can be connected to the 3Com Switch.
Connecting to a HP ProCurve Switch Using a Console cable & Putty
- Serial to USB Adapter:
- Connect the Console and Serial adapter together (Female end to the Serial Male end).
- 2: Connect the USB cable into your computer/laptop and launch “Device Manager” Verify which COM Port the cable has picked up and make a note of the port number.
To configure the switch from the console:
- Connect the console port to a laptop or PC using the RJ-45 to DB-9 serial port adapter.
- At the shell prompt type ezsetup.
- Enter the hostname.
- Enter the root password.
- Enter yes to enable services like Telnet and SSH.
- Next, select one of the switch management options:
Open the Web browser on the PC, and enter the
switch address, to
access the
switch's Web interface.
Using the 192.168.1.1 IP address
- Click Start, and then click Control Panel.
- Click Local Area Connection, and then click Properties.
Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.
To remote access the switch, we are going to use an Opensource software named Putty. The Putty software is available on the putty.org website. After finishing the download, run the software and wait for the following screen. Select the Telnet option, enter the HP Switch IP address and click on the Open button.
Connecting an External Ethernet Switch
- Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router. (See Figure 3-2.)
- Connect the other end of the cable to the available port on the Ethernet switch to add additional Ethernet connections.
- Turn on the Ethernet switch.
