The cost to have your vehicle's car computer reprogrammed will all depend on the dealer/mechanic you use, the vehicle you drive and your geographical location From what we researched online, the costs to simply reprogram the car's computer and nothing else would range anywhere from $80 to $180.
When removing cables, remove negative first, then positive. If you just want to reset the ECU, removing only negative is good enough. When installing cables, install positive first, then negative. It's a real tight fit, but if you can find it and disconnect it, leave it disconnected for 30 seconds.
If you are swapping out your BMW battery for a new one with different amperage and or voltage specs, the car needs to be told this so it can adjust for the new battery settings and not damage your car's fragile electrical system. As a result, reprogramming will need to be done.
Yourself - Replacing the battery yourself is very easy and straightforward, especially if you install a new battery with the same specs as the original. You can still change a BMW battery yourself, do it right, and still save money.
BMW CC-ID codes readout
- Turn the ignition on.
- Dismiss or wait for all warning and failure messages to disappear.
- Use left stalk to navigate to “CHECK” submenu.
- Press BC button on the left stalk and hold it pressed for 5 seconds.
- Release the button when BMW CC-ID codes appear on the bottom display.
A BMW battery needs to be registered so that the engine control module (known in BMW terms as DME - Digital Motor Electronics) can properly charge the battery. Skipping the battery registration procedure can cause the new battery to fail prematurely.
How to perform Factory Reset on Android smartphone?
- Tap Apps.
- Tap Settings.
- Tap Backup and reset.
- Tap Factory data reset.
- Tap Reset Device.
- Tap Erase Everything.
New BMW Key Programming Instructions
- Insert the key into the ignition and turn it rapidly to position 1 and back.
- Remove the key from the ignition.
- While holding down the unlock button, press the BMW logo 3 times.
- Release the unlock button.
- To complete the BMW key programming process, turn on the ignition.
Insert the valvetronic motor and connect its 2 pin plug. Then switch the ignition onto position 2 and within a space of 15 seconds, depress the accelerator pedal down to full throttle 10 times and you will hear the valvetronic motor program itself back to factory spec.
Whenever you reset your ECM, then you remove the long term memory of the car's computer memory. The process deletes error codes useful when conducting mechanical tests on your vehicle. The data becomes the default, and neutral and idle speed, spark, and fuel logs are no longer available.
Troubleshooting Steps That Haven't Worked (for Me)Delete all paired Bluetooth devices (BMW) and the Bluetooth accessory (car) in iOS, then enable pairing mode to re-pair the devices. Update iOS software (this often makes the situation worse) Factory reset the iPhone (a huge waste of time)
How do I reset my IP camera?
- Keep the device powered on for at least 30 seconds to complete its normal startup.
- Find something like a pin to press the Reset button on the camera and hold it for 15 seconds to restore the settings to factory defaults.
With your iDrive navigation open, use the settings menu to scroll to "Navigation system version", where you will see the region, version and year of your current GPS data.
Follow the steps below:
- First, open the Google Play Store. If you have multiple Google accounts, be sure you're signed into the right one.
- Click on menu, then go to "Subscriptions".
- Choose the BMW Connected subscription you wish to cancel and tap on the "Cancel Subscription" option.
- Finish up as directed.
