A: In short, to replace a Scion key usually cost between $70-$350.
Programming a Single Key
- Insert the key into the ignition, and turn it to the on position.
- Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.
- Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.
- Repeat the process for a third time.
2011 Scion tC Key Fob Remote Programming Instructions
- Begin with the key out of the ignition.
- OPEN and UNLOCK the DRIVER'S side door.
- Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.
- CLOSE then OPEN the DRIVER's side door TWICE.
- Insert key INTO the ignition then REMOVE it.
- CLOSE then OPEN the DRIVER's side door TWICE.
2009 Scion tC Keyless Entry Remote Fob Programming Instructions
- Driver's door open, key removed from ignition switch.
- Within 5 seconds, insert and remove key from ignition switch twice.
- Within 40 seconds, close and open driver's door twice.
- Insert and remove key from ignition switch.
- Within 40 seconds, close and open driver's door twice.
2008 Scion tC Keyless Entry Remote Fob Programming Instructions
- Driver's door open, key removed from ignition switch.
- Within 5 seconds, insert and remove key from ignition switch twice.
- Within 40 seconds, close and open driver's door twice.
- Insert and remove key from ignition switch.
- Within 40 seconds, close and open driver's door twice.
PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds. 13. The door locks will cycle to confirm successful programming of the remote.
2005 Scion TC Key Fob Remote Programming Instructions
- Driver's door open, key removed from ignition switch.
- Within 5 seconds, insert and remove key from ignition switch twice.
- Within 40 seconds, close and open driver's door twice.
- Insert and remove key from ignition switch.
- Within 40 seconds, close and open driver's door twice.
PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds. 13. The door locks will cycle to confirm successful programming of the remote.
2006 Scion TC Key Fob Remote Programming Instructions
- Driver's door open, key removed from ignition switch.
- Within 5 seconds, insert and remove key from ignition switch twice.
- Within 40 seconds, close and open driver's door twice.
- Insert and remove key from ignition switch.
- Within 40 seconds, close and open driver's door twice.
How to Program Your Toyota Vehicle Remote
- Turn your key in the ignition from “off” to “on,” and repeat within five seconds.
- Within 40 seconds, close and open the driver door twice, and then insert and remove the key from the ignition one more time.
- Again, be sure to perform steps one and two within 40 seconds.
AutoZone takes the keys and duplicates them to a precise accuracy. The keys are also cut digitally, using state-of-the-art equipment, tools and technology. Your key will be cut to your satisfaction before you leave your AutoZone, or they will cut it over again.
The vehicle identification number, or VIN, is what's designated for each cut in the key. Only the owner of a vehicle can make car key from VIN number. So don't worry, your vehicle is completely safe.
AutoZone sells blank automotive keys that are compatible with BMW, Mercedes, Honda, Volvo, Kia, Mazda, Toyota, and Chrysler, among others. Blank key prices range from $3 to $6, and AutoZone can cut and copy keys for your car. AutoZone also sells remote key fobs and transponder key fobs ranging in price from $15 to $90.
Coming from the low German dialect for the word Fuppe, meaning “pocket,” watch fobs were around as early as 1888. Others have suggested that the term stands for frequency operated button, but that ignores heavy use of the word before the remote keyless entry system.
Shaved keys are known by other names as well, such as "master keys" or "jigglers." They work by fitting into the vehicle's ignition and fooling the ignition system into believing it's the original key. This method is just as effective-providing they can get the key thin enough to "jiggle" into the car's ignition.
The simple answer to this question is – no, not really. Walmart can make duplicate car keys. Most car manufacturers don't want stores like Walmart to be able to make copies of their chip keys. They don't even want locksmiths to be able to do it.
If you lose it: You could call a locksmith, who can come and make you a new key on the spot. In some cases—an unusual or older vehicle—a locksmith may not be able to help. You might need to buy a new ignition lock cylinder and key from the dealer or an independent repair shop.
No, it does not matter, if you've lost your only set of keys, an auto locksmith can provide you with a replacement and re-program the new car key to match your vehicle. The old key will be de-programmed to make it useless, in case it has been stolen.
