Step 1: Connect your PS4 Controller via USB or Bluetooth
- Plug the smaller end of your micro-USB cable into the port on the front side of your controller (below the light bar).
- Plug the bigger end of your micro-USB cable into a USB port on your computer.
- The cable connection is completed.
If your monitor has an HDMI output, you can simply use HDMI cable to connect PS4 to your display. To connect PS4 to PC with sound, you can easily use a pair of headphones with you console wirelessly using Bluetooth USB dongle. Alternatively, you can connect a headset to a controller via a 3.5 mm stereo jack cable.
Reset the DUALSHOCK 4 wireless controller
- Turn off and unplug your PS4.
- Locate the small reset button on the back of the controller near the L2 shoulder button.
- Use a small tool to push the button inside the tiny hole.
- Connect the controller to the PS4 using a USB cable and press the PS button.
Yes, you can use your laptop's HDMI port to plug in your PS4 and enjoy gaming on-the-go. There are a couple of things that you need to do in order to finally sit back and play your PS4 games through a laptop screen.
On Windows 10, you can open the Settings app from the Start menu, select “Devices,” and then select “Bluetooth.” The DualShock 4 will appear here as a “Wireless Controller” if it's in pairing mode. You can then select it and click “Pair” to pair it with your computer.
If you are unable to connect your PS4 controller to your Windows PC, you should disable your computer's Bluetooth, turn it back on, and try to pair it to your device again. You can turn off Bluetooth from the Windows Action Center or from the Windows Settings menu.
To test the game controller in Windows, follow these steps:
- In Control Panel, open Game Controllers. To do this, use one of the following methods:
- Click your game controller, and then click. Properties.
- On the Test tab, test the game controller to verify functionality.
If your Xbox One controller is not recognized, the problem might be your USB port. To fix the problem, connect the controller to the port on the back of your PC and check if that solves the problem. If the issue is still there, you should try updating your system and check if that helps.
The flashing blue light simply means that there is a syncing issue between devices; either the controller and the console (in this case, your iPad), or the controller and a charging station. The easiest solution is to reset it using. To do this, there is a small hole on the back of the controller.
The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).
Hold the PS-button and Share-button simultanously for some seconds while the PS4 is turned on. This will reset all connections of the controller and searches for a new one. If this doesn't help, try different USB-cables after resetting. If that also doesnt work, your controller is probably damaged.
What causes PS4 controller drift? The most likely cause of analog stick drift is dust, dirt and grime working its way into your controller. Over time, all these nasties can build up and affect your electrical connections. And when this happens, your controller might start playing up in strange and random ways.
Your PS4 Controller is red because your USB port or charger is faulty. If after it is fixed, it still turns on with red light it is a controller hardware problem. The ribbon inside your Controller may need replacement.
Press and hold the PS and sharing buttons until the lightbar begins to strobe quickly (approximately 3-5 seconds). While it's quickly double strobing, it's in the pairing state like any other bluetooth device. If the strobe is a slow on and off, then the controller is trying to connect to your PS4 or PC.
Resetting your controller can fix some of the issues you might be having, so go ahead and give that a try before doing anything else. In order to reset your PS4 controller, you will first have to go into the settings menu on your PlayStation 4.
