It is a 6NZ C-15 and requires 10 gallons of oil to fill to capacity with a filter change.
Diesel fuel turns to a gel state in freezing temperatures so truckers usually add anti-gel fluid into the fuel to help prevent this, and they leave the engine running to keep the fuel from gelling in the engine. Some trucks do not have an auxiliary power unit (APU) to generate electricity when the engine is turned off.
6. How many miles can a semi truck go on one tank of gas? Semi trucks can go about 2,100 miles on a tank of diesel fuel (not usually gasoline), assuming tanks totaling 300 gallons and an average fuel efficiency of 7 miles per gallon.
between 4 to 8 miles per gallon
4th Generation 6.7L Cummins Specifications (2010-2018)
| 4th Gen 6.7L Cummins Years: | 2010-2018 |
|---|
| Engine Oil Capacity: | 12 Quarts or 11.4 Liters |
| Coolant Capacity: | 5.7 Gallons or 23.8 Quarts |
| Fuel: | 2007.5-2013 B5 Compatible 2013.5+ B20 Compatible |
| Fuel Tank Size: | 28 or 32 Gallons |
According to AAA, the national average price of diesel is $3.888 - call it $3.89 - per gallon at the time of this writing. Given that your truck likely has a fuel capacity of 150 to 300 gallons, it would cost $583 to over $1,167 per fill-up at the current rate.
This 1996 Ram 2500 has a cooling system capacity of 6 gallons (common for 12v Cummins engines). Divide your total cooling system capacity by 2; this is the amount of coolant concentrate (anti-freeze) that you must add to the radiator.
Generally speaking, no, 18-wheelers do not have bathrooms. That means that truckers have to do their business just like any other driver – at rest stops and truck stops. Unfortunately, truck stops don't always have the most sanitary bathrooms.
Small tanker trucks have a maximum capacity of 1,000 to 3,000 gallons, while large tankers have a maximum capacity of 11,600 gallons. However, the maximum capacity of a tanker truck depends on the density of the liquid being transported, explains Trailers of Texas tanker expert Nick Harmon.
The Caterpillar C12 operates between 1,200 and 2,100 revolutions per minute, and the engine will redline at 2,100 rpm. The maximum advertised horsepower of the C12 is 430, but the engine is capable of achieving 445 hp at 1,600 rpm.
The displacement is 15.2 liters, or 928 cubic inches. The power rating when used in a truck or bus is 435 to 625 horsepower at 2,100 rpm; RV and fire truck ratings are 600 to 625 horsepower at 2,100 rpm. The total torque output is 1,550 to 2,050 foot-pounds at 1,200 rpm. Total weight of the engine is 3,090 pounds.
Noting that Caterpillar has “no plans” to re-enter the on-highway engine business, Chadwick says for now, Caterpillar will continue to spec the Navistar-built CT13 13-liter diesel engine for its C-Series trucks.
Caterpillar C15Following the production of the 3406E, Caterpillar released the C15 in 1999. This engine is very popular because of its reliability and versatility. It's so versatile in fact, that Cat lists over 34 applications that are powered by this engine.
Advanced Combustion Emissions Reduction Technology
Seems to be a good engine. No problems with the motor, some with the Pete truck itself (wiring issues). It doesn't burn any oil, and its been quite a while since a rebuild. The Jakes are the best I have seen in a Cat motor.
